Skip to content Skip to navigation menu
100% OEM Parts for Every Commercial Kitchen. Shop Online and Parts Ship Today! Call us at 1-800- 458-5593
Connect

October 1, 2018 Preventative Maintenance

How to Clean A Stand Mixer

 

How to Clean A Stand Mixer

 Stand mixers are a staple in every commercial kitchen and because they are typically used to mix messy, sticky, gooey ingredients, they can become very dirty, very quickly. The more diligent you can be in wiping down the equipment after every use, the easier it will be to keep it clean and working correctly for the long run.

Why Do I Need to Clean My Stand Mixer?

Cleaning a stand mixer isn’t difficult, but you have to be patient to ensure that you get encrusted debris out of every nook and cranny. Be sure to pay attention to all of the areas of the machine including all of the knobs, levers, under the head and in the ventilation slots. Keeping a clean mixer means ensuring a longer life for a piece of equipment that comes in contact with food that dry on and in the appliance and affect its performance.

Steps to Clean My Stand Mixer
  • Before cleaning the appliance, be sure to unplug the unit. Never spray or hose down the appliance and always use caution when using any liquid to clean the surface area. Using a damp cloth will help to minimize the chances of any liquid entering the appliance.
  • Take apart all of the attachments, shields and mixing bowls and clean these parts separately in hot soapy water. Be sure to dry these pieces before you store them.
  • Be diligent in wiping down all exterior surfaces of the appliance after each use with a damp cloth. You can also use a small brush with a mild cleaner to get into the hard-to-reach areas.
  • Don’t forget to clean the shaft, under the motor head and also inside the attachment hub. You can tilt back the motor head to clean underneath it and down the shaft with a microfiber cloth. To clean inside the machine, you can remove the hub plate and wipe inside. Once dry, replace the hub plate securely.
  • This is also a good time to remove debris from the ventilation shaft with a small brush or appliance vacuum.
  • Don’t forget about the bowl cradle. A lot of dirt, grime and grease can gather here so it needs to be wiped down regularly. Also check the underneath of the mixer by laying it on its side to wipe off any extra residue or food particles. When you set it up again on its base, be sure to inspect the entire machine to be sure that dust and grime have not collected on any other parts or edges on the appliance.
  • Last, but not least, wipe down the entire appliance using a soft, dry towel so it is ready for its next use. If you store it in a cabinet or away from the countertops, it will be less likely to build up residue before it is ready to use again.

 Need to replace a bowl, dough hook or paddle?  Find everything you need on HeritageParts.com


LIKE OUR POSTS? CONNECT AND SHARE!

MOST POPULAR

Thank You for subscribing to Heritage Parts Connect! Keep on the lookout for new insights, how-to's and more!
Error: Please try again!

LIKE OUR POSTS? CONNECT!